Load "Bug" when running aplha n?

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
wes kiser
Super MS/Extra'er
Posts: 1402
Joined: Tue Jan 03, 2006 2:49 pm
Location: Charlotte, NC

Load "Bug" when running aplha n?

Post by wes kiser »

Running the latest beta.

On the KTM single, we are running N-alpha for primary load. I have noticed if TPS goes negative, the code seamed to roll over at a load of 65,000 %. This of course puts it at the 100% timing and fueling values . I have trouble keeping the TPS from reading at least slightly negative at times.
86 Rx-7, swapped to 2.3 ford turbo (BW EFR 6758), ms3/ms3x sequential fuel /waste spark, ls2 coils
88 Tbird 2.3t, Microsquirt Module (PIMP), TFI ignition
Top
muythaibxr
Site Admin
Posts: 8230
Joined: Thu Oct 14, 2004 12:48 pm

Post by muythaibxr »

Probably because the load variable is unsigned. That's an easy fix.

Looks like with all the bug reports rolling in, I'll have to reopen the bug list!

I'm losing track of them all.

Ken
Top
UnaClocker
Super MS/Extra'er
Posts: 1933
Joined: Fri May 07, 2004 12:59 pm
Location: Tacoma, WA
Contact:
Contact UnaClocker

Post by UnaClocker »

Starting to get a broader range of testers as the code matures and nears completion. :)
Brian
'84 Dodge Rampage
Top
Post Reply

Return to “MS2/Extra Development”