Flood clear mode in MS2E2.0 ?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 38
- Joined: Sun Jan 20, 2008 9:27 pm
Flood clear mode in MS2E2.0 ?
Just switched over to E2.0 from standard code and trying to get my engine started, and having the ability to crank to clear the motor would be nice, is there an option for it in megatune I'm missing ? or a preset value thats allready built into the 2.0e code ?
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Only last week I noticed that the flood clear setting was missing from MS2/Extra and MS2 2.883.
It will be in the next MS2/Extra beta. Currently it is set at 70% but you can't change it.
James
It will be in the next MS2/Extra beta. Currently it is set at 70% but you can't change it.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Helpful MS/Extra'er
- Posts: 38
- Joined: Sun Jan 20, 2008 9:27 pm