Flood clear mode in MS2E2.0 ?

jeffsnyder · Post by **jeffsnyder** » Mon Jan 28, 2008 9:02 pm

Just switched over to E2.0 from standard code and trying to get my engine started, and having the ability to crank to clear the motor would be nice, is there an option for it in megatune I'm missing ? or a preset value thats allready built into the 2.0e code ?

Xtatic · Post by **Xtatic** » Tue Jan 29, 2008 8:34 am

just whatever you do, make sure your TPS is plugged in

i had quite a frightening experience with using clear mode and tps unplugged

Post by **jsmcortina** » Tue Jan 29, 2008 3:56 pm

Only last week I noticed that the flood clear setting was missing from MS2/Extra and MS2 2.883.
It will be in the next MS2/Extra beta. Currently it is set at 70% but you can't change it.

James

jeffsnyder · Post by **jeffsnyder** » Tue Jan 29, 2008 3:57 pm

this time when I was messing with my car I went to WOT and cranked the motor, pulse widths in megatune read 0. so that answers my question