hi all,
ive been looking around and have become slightly interested in learning how to program my ms and change the code.
my main interest stems from the fact that im an electrican and the gift of being able to computer program will become a valuble asset to me- with things going in the way of home and commercial automation more and more these days, i might look into building my own automation system one day if i have the knack for it!
i was wondering if there are many courses at university or polytech that teach coding in c language?
my other question is, i need quite a few outputs from my ms, to make things easier the car im squirting is a honda prelude si turbo.
i need outputs for:
vtec (future engine transplant)
water to air intercooler pump
cooling fan
launch control
boost control
nos
methanol injection
traction control on the front two wheels and if possible selectable to all four wheels
plus four extra outputs for other stuff
is it easy to write a code so i can select these outputs to switch on at a certain boost/temperature/rpm level/time?
any help and info on the would be great,and sorry for the noob questions but this is a subject that i know nothing about!
thanks for understanding!
mike
brand new to writing code +some general output questions ms2
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 48
- Joined: Thu Sep 20, 2007 10:24 pm
-
- Master MS/Extra'er
- Posts: 802
- Joined: Tue May 11, 2004 8:58 am
- Location: dallas texas usa
- Contact:
-
- Helpful MS/Extra'er
- Posts: 48
- Joined: Thu Sep 20, 2007 10:24 pm