I am not currently using FP relay control (there is another system in place), so I'd like to use this for advance solenoid control... Unfortunatly, FPRelay is not among the list for the general outputs. Any help would be appreciated. I assume that because it is already set up for a relay I could connect it directly to the solenoid, or do I have to worry about flyback when the relay closes...?
Richard
FP Wire as general relay output...
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 142
- Joined: Sun Nov 07, 2004 10:15 pm
- Location: Southern Arizona
Re: FP Wire as general relay output...
It already has the protection diode in place so hooking it to a solenoid is fine but you would have to ask one of the coders to work up a special code for you if its even possible i would be interested in this also.darkstarmedia wrote:I am not currently using FP relay control (there is another system in place), so I'd like to use this for advance solenoid control... Unfortunatly, FPRelay is not among the list for the general outputs. Any help would be appreciated. I assume that because it is already set up for a relay I could connect it directly to the solenoid, or do I have to worry about flyback when the relay closes...?
Richard
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm