Launch control only holding set rpm for a few seconds?

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
Eville140
Helpful MS/Extra'er
Posts: 60
Joined: Mon Dec 19, 2005 8:16 pm
Contact:

Launch control only holding set rpm for a few seconds?

Post by Eville140 »

MS2-Extra pre2.0 Beta 20070920
MS2 V3.0

It activates and the timing drops and stay to the set ignition point. But after a few seconds and the car starts to build boost the RPM climb pretty rapidly. I have played with the number for events and spark cuts and it doesn't make much difference.

Any ideas?

Thanks
Randy
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

Have you tried cutting more sparks? e.g. 9 of 11 or 10 of 11 ? That really ought to limit the rpms.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Eville140
Helpful MS/Extra'er
Posts: 60
Joined: Mon Dec 19, 2005 8:16 pm
Contact:

Post by Eville140 »

I will give it a try tomorrow, I have made enough noise for one day :lol:
Post Reply