Is there a way to log/display Boost Duty Cycle in MT?
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 875
- Joined: Wed Dec 05, 2007 1:40 pm
- Location: San Diego, CA
- Contact:
Is there a way to log/display Boost Duty Cycle in MT?
I would like to know what the MS *thinks* its doing. Is there some way to display the boost solenoid duty cycle on the screen in MegaTune?
2000 VVT Miata turbo, MS3Pro
Contact me if interested in a MS-II 2nd gen NB Miata PnP board.
Contact me if interested in a MS-II 2nd gen NB Miata PnP board.
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
-
- Super MS/Extra'er
- Posts: 875
- Joined: Wed Dec 05, 2007 1:40 pm
- Location: San Diego, CA
- Contact:
Awesome, I'll see how the boost control actually runs, but my guess is there is someone this will help with tuning.
The other one that seems really, really helpful is recording if sync was dropped - or tooth counts for cam and crank (so a person can check the ratios), something like that. With those in place, it would seem a lot easier to get a not-yet-understood system into the MS-flock.
Thanks!
The other one that seems really, really helpful is recording if sync was dropped - or tooth counts for cam and crank (so a person can check the ratios), something like that. With those in place, it would seem a lot easier to get a not-yet-understood system into the MS-flock.
Thanks!
2000 VVT Miata turbo, MS3Pro
Contact me if interested in a MS-II 2nd gen NB Miata PnP board.
Contact me if interested in a MS-II 2nd gen NB Miata PnP board.