Hi guys,
Got weird behavior when reading ignition advance table1. that is on page 3. Event Megatune after opening table with Ign Adv1 -> RPM lowers and very unstable.
the beggining of the question is here
http://msextra.com/viewtopic.php?t=27827&start=20
Serj
Special issue for reading tables ?
Moderators: jsmcortina, muythaibxr
-
Serj
- Experienced MS/Extra'er
- Posts: 161
- Joined: Sat Oct 13, 2007 11:44 pm
- Location: Russia, Moscow
- Contact:
More info.
When reading page 3 ( igntable1 for instance ) iacpos jumps from open pos ( my case 68 ) to 20. IAC stay in this (20) steps unitl i read page 1 ( ie change to page 1 by r 0 blablabla)
any suggestions ? its MSII 1.0.2
When reading page 3 ( igntable1 for instance ) iacpos jumps from open pos ( my case 68 ) to 20. IAC stay in this (20) steps unitl i read page 1 ( ie change to page 1 by r 0 blablabla)
any suggestions ? its MSII 1.0.2
Supercharged Lada http://www.msruns.com/viewtopic.php?f=105&t=22698