MS2extra 3.1.1 anti lag code

baldur · Post by **baldur** » Tue Jan 26, 2016 2:04 pm

I have stopped development of this as I have a different hardware platform for my custom work now.

grom_e30 · Post by **grom_e30** » Wed Jan 27, 2016 6:33 am

any chance you can host your code somewhere?

baldur · Post by **baldur** » Wed Jan 27, 2016 7:42 am

grom_e30 wrote:any chance you can host your code somewhere?

https://www.dropbox.com/sh/c0406r7y3qtg ... _Ilfa?dl=0

jasaircraft · Post by **jasaircraft** » Wed Jan 27, 2016 8:52 am

roving idle wasnt achieved on this right?

baldur · Post by **baldur** » Wed Jan 27, 2016 8:58 am

jasaircraft wrote:roving idle wasnt achieved on this right?

Not specifically, I used overrun fuel cut to achieve that effect, as described earlier in the thread.

jasaircraft · Post by **jasaircraft** » Wed Jan 27, 2016 9:34 am

oh right, i just read it, was there a specific output pin to move a big idle valve in order to bypass air thourh? that could also help i guess

baldur · Post by **baldur** » Wed Jan 27, 2016 9:36 am

I did implement that as well, I implemented an AND function for the general purpose outputs, so it's possible to take one of the bit fields and AND it with a number to find out if ALS is active and use that to control a throttle kicker or extra air bypass valve. I don't remember exactly how to do it, this was 5 years ago.

jasaircraft · Post by **jasaircraft** » Fri Jan 29, 2016 8:49 am

hahaha thanks Baldur!

Post by **jsmcortina** » Fri Jan 29, 2016 9:12 am

For info, the current firmware include an AND function in the on/off outputs too.

James

Megasquirt Support Forum (MSEXTRA)

MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code

Re: MS2extra 3.1.1 anti lag code