MS2extra 3.1.1 anti lag code
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sun May 02, 2004 6:39 pm
- Location: Reykjavik, Iceland
- Contact:
Re: MS2extra 3.1.1 anti lag code
I have stopped development of this as I have a different hardware platform for my custom work now.
Baldur Gislason
Re: MS2extra 3.1.1 anti lag code
any chance you can host your code somewhere?
1990 bmw 320i daily driver with m20b25 ms3 sequential fuel, 380cc injectors, d585 coil near plug, home made cam sync, launch control, fan control, vss, homebrew egt logging what's next????
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sun May 02, 2004 6:39 pm
- Location: Reykjavik, Iceland
- Contact:
Re: MS2extra 3.1.1 anti lag code
https://www.dropbox.com/sh/c0406r7y3qtg ... _Ilfa?dl=0grom_e30 wrote:any chance you can host your code somewhere?
Baldur Gislason
-
- Super MS/Extra'er
- Posts: 905
- Joined: Mon Jul 07, 2008 5:45 pm
Re: MS2extra 3.1.1 anti lag code
roving idle wasnt achieved on this right?
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sun May 02, 2004 6:39 pm
- Location: Reykjavik, Iceland
- Contact:
Re: MS2extra 3.1.1 anti lag code
Not specifically, I used overrun fuel cut to achieve that effect, as described earlier in the thread.jasaircraft wrote:roving idle wasnt achieved on this right?
Baldur Gislason
-
- Super MS/Extra'er
- Posts: 905
- Joined: Mon Jul 07, 2008 5:45 pm
Re: MS2extra 3.1.1 anti lag code
oh right, i just read it, was there a specific output pin to move a big idle valve in order to bypass air thourh? that could also help i guess
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sun May 02, 2004 6:39 pm
- Location: Reykjavik, Iceland
- Contact:
Re: MS2extra 3.1.1 anti lag code
I did implement that as well, I implemented an AND function for the general purpose outputs, so it's possible to take one of the bit fields and AND it with a number to find out if ALS is active and use that to control a throttle kicker or extra air bypass valve. I don't remember exactly how to do it, this was 5 years ago.
Baldur Gislason
-
- Super MS/Extra'er
- Posts: 905
- Joined: Mon Jul 07, 2008 5:45 pm
Re: MS2extra 3.1.1 anti lag code
hahaha thanks Baldur!
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS2extra 3.1.1 anti lag code
For info, the current firmware include an AND function in the on/off outputs too.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".