MS2extra 3.1.1 anti lag code

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

jasaircraft
Super MS/Extra'er
Posts: 902
Joined: Mon Jul 07, 2008 5:45 pm

Re: MS2extra 3.1.1 anti lag code

Post by jasaircraft »

Could you please writte a roving idle version for us? ;) also it would be great to have flatshift on a different input pin and setup window... :)
m3ltd0wn
Helpful MS/Extra'er
Posts: 149
Joined: Sun Oct 03, 2010 2:32 am

Re: MS2extra 3.1.1 anti lag code

Post by m3ltd0wn »

I think it should be great if Baldur could port als code to the last version of the firmware, much has improved from 3.1.1.

anyway 10x Baldur for adding this feature to ms2!
mrx79
Experienced MS/Extra'er
Posts: 299
Joined: Wed Oct 29, 2008 8:26 am
Location: Frankfurt / Germany

Re: MS2extra 3.1.1 anti lag code

Post by mrx79 »

Does anyone have working overrun fuel cut values which gives an acceptable idle with raised throttle stop Position?!
Honda CRX B16A1 Turbo | MS3 running | pre1.5.1 beta7 Firmware | 24/1 Dual Wheel | COP ignition | 725cc ID injectors
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

Can you add some kind of pasword protetion to the tune ? btw, it works great !
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
m3ltd0wn
Helpful MS/Extra'er
Posts: 149
Joined: Sun Oct 03, 2010 2:32 am

Re: MS2extra 3.1.1 anti lag code

Post by m3ltd0wn »

mrx79 wrote:Does anyone have working overrun fuel cut values which gives an acceptable idle with raised throttle stop Position?!
over run fuel cut ->on

rpm greater than: 1300
kpa lower than: 100
tps lower than : 2%
coolant greater than: -40
after delay: 0

lumpy idle, sounds like you have 320 degrees cams :D but it works :D
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

Just use idle valves, if you are not in group N...
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
jasaircraft
Super MS/Extra'er
Posts: 902
Joined: Mon Jul 07, 2008 5:45 pm

Re: MS2extra 3.1.1 anti lag code

Post by jasaircraft »

vlad_rally wrote:Can you add some kind of pasword protetion to the tune ? btw, it works great !
Agree on that!
And roving idle please baldur!! :D
m3ltd0wn
Helpful MS/Extra'er
Posts: 149
Joined: Sun Oct 03, 2010 2:32 am

Re: MS2extra 3.1.1 anti lag code

Post by m3ltd0wn »

use the settings I've posted above, you'll get the roving idle, just play with those settings until it works best for your application :D
jasaircraft
Super MS/Extra'er
Posts: 902
Joined: Mon Jul 07, 2008 5:45 pm

Re: MS2extra 3.1.1 anti lag code

Post by jasaircraft »

m3ltd0wn wrote:use the settings I've posted above, you'll get the roving idle, just play with those settings until it works best for your application :D
Can you make a quick vid of your engine idling please? exhaust sound...
m3ltd0wn
Helpful MS/Extra'er
Posts: 149
Joined: Sun Oct 03, 2010 2:32 am

Re: MS2extra 3.1.1 anti lag code

Post by m3ltd0wn »

I'll do a short video this week :D
slyrye
Experienced MS/Extra'er
Posts: 255
Joined: Sun Aug 12, 2007 2:41 pm
Location: Philippines
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by slyrye »

Please.include this Anti lag system on latest alpha code...! :)
MSnS'n'4G15
jasaircraft
Super MS/Extra'er
Posts: 902
Joined: Mon Jul 07, 2008 5:45 pm

Re: MS2extra 3.1.1 anti lag code

Post by jasaircraft »

m3ltd0wn wrote:I'll do a short video this week :D
Waiting.for.the vid...
slyrye
Experienced MS/Extra'er
Posts: 255
Joined: Sun Aug 12, 2007 2:41 pm
Location: Philippines
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by slyrye »

Please include Baldur's Antilag code on latest aplha...! :(
MSnS'n'4G15
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

It would really help if you could ad some king of spark cut idle limiting, to run the antilag with the throttle partly oppened, and this to be ignored when the antilag is turned on. Is it posible?
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

m3ltd0wn wrote:I'll do a short video this week :D
Does overrun fuel cut turn off when als in on?
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

baldur wrote:You'll have to refer to the 3.2.4 release notes for that info, I haven't a clue.

To achieve the hunting idle with overrun fuel cut, the settings should be something like this:
RPM greater than: 1300
KPA lower than: 110
TPS lower than: 10 (set this to 2% higher than TPS state when the throttle is at minimum)
Coolant greater than: -30
After delay: 0.0

Delay EGO: 0
Return fuel: 1250RPM

Does 'Overrun fuel cut' turn of when antilag is active ?
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
baldur
Experienced MS/Extra'er
Posts: 256
Joined: Sun May 02, 2004 6:39 pm
Location: Reykjavik, Iceland
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by baldur »

Yes, ORFC gets disabled when anti lag is switched on.
Baldur Gislason
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

baldur wrote:Yes, ORFC gets disabled when anti lag is switched on.
Thanks a milion! :D i've used this code on numerous rally cars, but with throttle cickers, now im doinn a gr. n subaru, and i'm not allowed to ad any extra funcky hardware.
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
vlad_rally
Helpful MS/Extra'er
Posts: 47
Joined: Sat Mar 12, 2011 11:39 pm
Location: Romania
Contact:

Re: MS2extra 3.1.1 anti lag code

Post by vlad_rally »

But but....the download link dosen't work :(
Vlad Pescaru
vlad@jpr.ro
facebook.com/JPR-Engineering-1401189803454787/
jasaircraft
Super MS/Extra'er
Posts: 902
Joined: Mon Jul 07, 2008 5:45 pm

Re: MS2extra 3.1.1 anti lag code

Post by jasaircraft »

Hi Baldur, where you able to work any more on this?
Post Reply