Median noise filtering
Moderators: jsmcortina, muythaibxr
Median noise filtering
Ive been using 3.2.1 since gslender released it and didnt want to upgrade to the newest version because of the median filter function, I have tps noise that only the median filter works to effectively eliminate any spikes (100% tps based AE). I wonder if this function will be implanted for the future releases.
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Median noise filtering
The current code implements an over-sampling feature on TPS.
Is your wiring correct in-line with the grounding directions in the manual ?
James
Is your wiring correct in-line with the grounding directions in the manual ?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: Median noise filtering
gonna try this out, the wiring is okay, i just dont know about the oversampling feature for the latest release, thanks.
-
- Experienced MS/Extra'er
- Posts: 299
- Joined: Wed Oct 29, 2008 8:26 am
- Location: Frankfurt / Germany
Re: Median noise filtering
Hallo James,
coudn't find the release not, can you maybe tell me since which firmware version the ADC oversampling was implemented and which channels (tps, map, etc.) have that feature.
Thanks very much and sorry that i did not found it in the search
Best regards
Malte.
coudn't find the release not, can you maybe tell me since which firmware version the ADC oversampling was implemented and which channels (tps, map, etc.) have that feature.
Thanks very much and sorry that i did not found it in the search
Best regards
Malte.
Honda CRX B16A1 Turbo | MS3 running | pre1.5.1 beta7 Firmware | 24/1 Dual Wheel | COP ignition | 725cc ID injectors
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Median noise filtering
I believe the current Extra release code is 3.3.1 and can be found here.mrx79 wrote:Hallo James,
coudn't find the release not, can you maybe tell me since which firmware version the ADC oversampling was implemented and which channels (tps, map, etc.) have that feature.
Thanks very much and sorry that i did not found it in the search
Best regards
Malte.
Ken
Last edited by kjones6039 on Fri Apr 04, 2014 6:02 pm, edited 1 time in total.
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Site Admin
- Posts: 39587
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Median noise filtering
You might want to hit "Refresh" on that page???kjones6039 wrote:I believe the current Extra release code is 3.2.5 and can be found here.
Ken
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: Median noise filtering
Just got my plexiglass belly button fogged up and couldn't see while my head was...... Well, you know.....jsmcortina wrote:You might want to hit "Refresh" on that page???
James
Fixed!! I think!
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance