PID RPM window holds 0 in my msq (for very long time...), I understand that 1-120 are valid numbers.
I don't know if some CL idle weird behavior I got is because of that, but I'm sure this is something you guys should know about.
PID RPM window hold invalid value
Moderators: jsmcortina, muythaibxr
PID RPM window hold invalid value
97 1.8T DIYPNP Seq Inj
http://megamiata.blogspot.co.il/
http://megamiata.blogspot.co.il/
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: PID RPM window hold invalid value
Zero has the same effect as one.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".