base tune

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
94_cobra
Experienced MS/Extra'er
Posts: 155
Joined: Sun Sep 28, 2014 5:49 pm

base tune

Post by 94_cobra »

Is there anyone that can help me configure a base tune to start with on my car? Its a turbo 94 cobra using MS pnp gen 2. I am going to be starting at a low boost setting, probably 6-8 psi. I was hoping maybe sombody can setup a file with alot of timing pulled and some extra fuel so I can work my way back. Im afraid ill hurt the car trying to go from a stock tune forward that would be lean and too much timing for boost.

Its a fairly basic setup-

e85 fuel
stock 351w
s480 turbo (1.32ar/96 turbine)
th400 transmission

the only parts on the engine are a efi carb style intake with an elbow and 70mm throttle body. I am more than willing to pay for somebody's help getting me going. I am familiar with tuning NA on my old moates QH setup but not comfortable yet with boost and megasquirt.

Thank you
Austin
ol boy
Super MS/Extra'er
Posts: 1532
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

Re: base tune

Post by ol boy »

Where are you located? Is this a SBC motor?
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
slow_hemi6
Super MS/Extra'er
Posts: 4122
Joined: Fri May 07, 2004 3:33 am
Location: Australia

Re: base tune

Post by slow_hemi6 »

351W tends to be a bit more FoMoCo than SBC.
Find the Manuals up top under Quick links: Manuals. :RTFM:
Cheers Luke
ol boy
Super MS/Extra'er
Posts: 1532
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

Re: base tune

Post by ol boy »

Looks like I over looked that and only saw the th400 (Chevy) part.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
Post Reply