MS2/Extra 3.4 feature freeze

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

MS2/Extra 3.4 feature freeze

Post by jsmcortina »

It is planned to feature freeze the pre-3.4 as of now and progress towards betas and imminent 3.4.0 release.

Please do continue to report any unexpected or buggy behaviour in the development code.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
acab
Experienced MS/Extra'er
Posts: 243
Joined: Tue Aug 21, 2012 5:52 am

Re: MS2/Extra 3.4 feature freeze

Post by acab »

With 4 cop use i will get little spark when power on ms?
DeadStiff
Experienced MS/Extra'er
Posts: 151
Joined: Fri Nov 23, 2012 10:12 am
Location: SoCal

Re: MS2/Extra 3.4 feature freeze

Post by DeadStiff »

That is a wiring issue, the relay that powers the coils should be controlled by the fuel pump relay. Right now your coils are receiving power before the MS is ready to control them.
MS3+X on 73 Karmann Ghia ignition only with LS2 truck coils firing in sequential, fuel next.
2333(103*70) Type 4 with DTM also sitting in living room just need exhaust.
acab
Experienced MS/Extra'er
Posts: 243
Joined: Tue Aug 21, 2012 5:52 am

Re: MS2/Extra 3.4 feature freeze

Post by acab »

DeadStiff wrote:That is a wiring issue, the relay that powers the coils should be controlled by the fuel pump relay. Right now your coils are receiving power before the MS is ready to control them.
No, i power up with FP relay ;(

I power ecu, it enable FP relay on one secont for fill fuel delivery and sparkC\sparkD are fire ;(
Post Reply