i think i found a bug
i can select JS4 for real time BARO with 6 cylinder 2 stroke
JS4 is thus already a spark output
the same for 12 cylinder fourstroke
however selecting 2e wideband on JS5 will give a conflict
and then using mini terminal it will display conflict on baro pin
3.4 alpha9 JS4 conflict
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: 3.4 alpha9 JS4 conflict
Please post your MSQ.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 606
- Joined: Sat Apr 11, 2009 12:54 pm
- Location: Aalsmeer the netherlands
- Contact:
Re: 3.4 alpha9 JS4 conflict
here it is
also with baro correction none and selecting wideband on JS5
it will give the reported conflict
but miniterminal will say it,s on the baro pin
also with baro correction none and selecting wideband on JS5
it will give the reported conflict
but miniterminal will say it,s on the baro pin
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: 3.4 alpha9 JS4 conflict
That MSQ does not give me any config errors on the latest MS2/Extra firmware.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".