Hi,
I'm quite new to Microsquirt. I know with some modification and msn extra software, we can run 4 cyl sequential. But can it be done with microsquirt? Or can I use GPIO to run 4 cyl sequential since there is enough hardware inside to run 4 injector? Thanks.
Regards,
Doddy
Microsquirt running sequential 4Cyl
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Microsquirt running sequential 4Cyl
To run sequential injection you need either an MS2 with the needed modifications and additional drivers or a Microsquirt module with additional injector drivers.
Jean
Jean
Re: Microsquirt running sequential 4Cyl
So it have to be ms2 or microsquirt module then.
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: Microsquirt running sequential 4Cyl
Yes, as Jean say you also need the additionnal drivers. For MS2 (v3.0 is prefered) you can look at280GE 1JZ wrote:So it have to be ms2 or microsquirt module then.
High-Z injectors :
http://www.jbperf.com/quad_ign_inj/index.html
Low-Z injectors :
http://www.jbperf.com/p&h_board/index.html
Cheers,
Manu