Hi,
it would be great if I could choose TPS for MAF input port.
Reason: My car has an airflow sensor and no TPS.
I need ADC6/ADC7 for other sensors.
Also I would like to retain the map sensor.
Jan
Feature Request: TPS for MAF Input Port
Moderators: jsmcortina, muythaibxr
Re: Feature Request: TPS for MAF Input Port
Have you tried selecting alpha-n for primary fuel with your MAF wired up to the tps line? You could still tune the car using the output from the MAF on the y axis and rpm still on x. Id try it at least once. You might be onto something...
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
-
- Super MS/Extra'er
- Posts: 884
- Joined: Sat Apr 30, 2011 12:34 pm
- Location: Sandefjord, Norway
Re: Feature Request: TPS for MAF Input Port
Will NOT work... You will not get any kind of useable resolution for fueling. If using a MAF, use MAF mode...
Joachim
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost
1974 Jensen-Healey
1990 VW Caravelle Syncro - running MS3+X
2014 Ford Fiesta EcoBoost