Feature request - Relay option for staged injection

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
dontz125
Super MS/Extra'er
Posts: 4200
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Feature request - Relay option for staged injection

Post by dontz125 »

I'm not sure when the "Relay" option got tucked into the MS3 paraphernalia, but the ability to use staged injection and sequential injection without increasing the number of injector channels would be welcomed by a lot of MS2 users. I realise the big push is to move everyone who wants "more, bigger, better!" to the MS3 platform, but this is something that would enhance the MS2 without competing too much with the MS3. The 4+4 install is still the realm of the MS2, no?
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
svocapri
Helpful MS/Extra'er
Posts: 51
Joined: Sat Nov 29, 2008 7:43 pm
Location: Rome, Georgia

Re: Feature request - Relay option for staged injection

Post by svocapri »

I too would like the ability to do this. I have a Holley 4bbl TBI set up and could really use the four squirts alternating to keep the pulse width down at low load, and then have the second set of injectors come in as the progressive throttle body opens the secondaries.

Does anyone know if this could be done with table switching?

Julian
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Feature request - Relay option for staged injection

Post by jsmcortina »

The Holley TBI requirement sounds like normal staging that already exists.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
dontz125
Super MS/Extra'er
Posts: 4200
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Feature request - Relay option for staged injection

Post by dontz125 »

Any thoughts on adding the relay function to the MS2, for those who aren't using Holley TBI? :D
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: Feature request - Relay option for staged injection

Post by jsmcortina »

dontz125 wrote:Any thoughts on adding the relay function to the MS2, for those who aren't using Holley TBI? :D
Not planned.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
dontz125
Super MS/Extra'er
Posts: 4200
Joined: Mon May 11, 2009 7:14 pm
Location: York, ON
Contact:

Re: Feature request - Relay option for staged injection

Post by dontz125 »

Baby_Cries2.jpg
QuadraMAP Sensor Module -- PWM-to-Stepper Controller -- Dual Coil Driver
Coming soon: OctoMAP Sensor Module
TTR Ignition Systems
Post Reply