Download MS2 firmware on blank CPU without BDM

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
hvz
MS/Extra Newbie
Posts: 6
Joined: Fri Jul 17, 2015 12:03 am

Download MS2 firmware on blank CPU without BDM

Post by hvz »

is it possible to download MS2 firmware on blank CPU without BDM?
any idea for not buying the usbdm and BDM ? maybe using an interface on serial/Parallel port of a PC?
Top
jsmcortina
Site Admin
Posts: 39618
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Re: Download MS2 firmware on blank CPU without BDM

Post by jsmcortina »

A blank chip needs the 'serial monitor' code loaded first before you can load firmware. Contact your dealer to have that loaded.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
Post Reply

Return to “MS2/Extra Development”