VE trims in untimed mode

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
ol boy
Super MS/Extra'er
Posts: 1532
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

VE trims in untimed mode

Post by ol boy »

I've noticed on a SBFord with a converted carb to efi intake that the outer 4 holes (1,5,4,8) run richer than the inner 4 (2,3,6,7). I assume this happens while idling and under boost. I also happen to have my 2 channels wired with outer 4 to channel 1 and inner 4 to channel 2.

I've thought about dual table but keeping the 2 sorted seems a bit of a pain when % gives better resolution.

Any thoughts, opinions...

Sent from my SM-G920V using Tapatalk
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
Post Reply