MS2/Extra pre-3.4.3 beta 3 released
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
MS2/Extra pre-3.4.3 beta 3 released
To announce the release of "MS2/Extra Pre 3.4.3 beta 3" this follows "MS2/Extra pre-3.4.3 beta 2"
Who should use this code?
Experienced users wanting to test the new features or users experiencing bugs fixed by this version.
Who should not use this code?
New or casual users - please use the current release code instead - see the Downloads page linked above.
Main changes since pre-3.4.3 beta 2
Bug fixes:
Flex timing didn't support negative timing. (Signed vs. unsigned
Changed features:
-
Minor/internal:
Sequenced batch-fire tooltip tweak.
http://www.msextra.com/downloads/dev/ms ... -3/beta-3/
Upgrading users are advised to enable the "old baro calc" for backwards compatability.
The current TunerStudio (2.6.0 or later) is required.
Who should use this code?
Experienced users wanting to test the new features or users experiencing bugs fixed by this version.
Who should not use this code?
New or casual users - please use the current release code instead - see the Downloads page linked above.
Main changes since pre-3.4.3 beta 2
Bug fixes:
Flex timing didn't support negative timing. (Signed vs. unsigned
Changed features:
-
Minor/internal:
Sequenced batch-fire tooltip tweak.
http://www.msextra.com/downloads/dev/ms ... -3/beta-3/
Upgrading users are advised to enable the "old baro calc" for backwards compatability.
The current TunerStudio (2.6.0 or later) is required.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
Hello James,
This code is the last iteration for MS2extra and solve some bugs from 3.4.2 release. why don't release it as release 3.4.3 and make it available on the download page as the stable one ?
Best regards,
Manu
This code is the last iteration for MS2extra and solve some bugs from 3.4.2 release. why don't release it as release 3.4.3 and make it available on the download page as the stable one ?
Best regards,
Manu
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
There are still some changes to Flex to backport from MS3. I had been waiting for feedback on the forum, but there has been none. However, recently I did get some info from DIYA indicating that the changes in MS3 were working for them.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
Do you expect inforlations about 1.5.1b6 rewrite or about the «sensor fault» triggered during some startups due to sensor wake-up frequency ?
-
- Site Admin
- Posts: 39619
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
Yes.Manu wrote:Do you expect inforlations about 1.5.1b6 rewrite
I've not heard of this as an issue?or about the «sensor fault» triggered during some startups due to sensor wake-up frequency ?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
Hi James,jsmcortina wrote:I've not heard of this as an issue?or about the «sensor fault» triggered during some startups due to sensor wake-up frequency ?
James
In certain case, MS3 report a Fuel-Flex sensor default AND display the real ethanol percentage and fuel temperature. The customers who encounters this problem haven't any problem with this because they don't activate the LIMP mode for Fuel-Flex sensor.
Anyway, I heard that a Fuel-flex sensor, due to manufacturer tolerance, can output some frequency out the normal range (50hz - 150hz) at start-up. Effectively, at start-up some customers report a frequency around 48~49hz, but not always. It seem that lead to trigger a sensor fault. But I'm unsure about this. I don't know the behaviour of the code regarding fuel-flex sensor fault detection. This was with 1.4.1 firmware.
All fuel-flex sensors are OEM with Brazil curve, not Chinese ones.
There are some screenshot of this problem on this topic (page 28) :
https://forum.megasquirt.fr/viewtopic.p ... &start=250
BR,
Manu
-
- Master MS/Extra'er
- Posts: 723
- Joined: Mon Feb 15, 2010 4:57 am
- Location: Alès - France
- Contact:
Re: MS2/Extra pre-3.4.3 beta 3 released
FIY, I also noticed a 300ms delay between power on of the sensor and the first relevant information. Continental state a 250ms gap.
Re: MS2/Extra pre-3.4.3 beta 3 released
Ive lost track of the fixes from 342. Can i send adc values over can for the analog input for knock input? In 342, only allows input from js4/5 but does alow can port/bit input.
Thanks Ryan
Sent from my SCH-I535 using Tapatalk
Thanks Ryan
Sent from my SCH-I535 using Tapatalk
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.