MAP Sample/Logger features

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
Nath88
MS/Extra Newbie
Posts: 27
Joined: Wed May 22, 2013 8:13 pm
Location: Brisbane, Australia

MAP Sample/Logger features

Post by Nath88 »

Hi,
Would it be possible to have an option for taking the maximum value within the MAP window, rather than the minimum?
Would it be possible to log TPS with the MAP logger, the same way as RPM? The MAP signal of my engine changes with TPS and RPM, making it difficult/impossible to analyse without TPS included.

Thanks!
Yamaha YZ250 - Microsquirt V3 - Madhu PWM Fuel Pressure Regulator - 14point7 Spartan Lambda Controller 2
Nath88
MS/Extra Newbie
Posts: 27
Joined: Wed May 22, 2013 8:13 pm
Location: Brisbane, Australia

Re: MAP Sample/Logger features

Post by Nath88 »

I should add that I'm happy to pay someone to do this modification to the firmware. My project somewhat hinges on it. I'd prefer code modification to building an external circuit to catch the peak and hold it for the ecu to read.
Yamaha YZ250 - Microsquirt V3 - Madhu PWM Fuel Pressure Regulator - 14point7 Spartan Lambda Controller 2
Post Reply