untimed batch fire vetrim tables

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

untimed batch fire vetrim tables

Postby ol boy » Sat Jul 01, 2017 9:32 am

What's needed to enable the fuel injector ve trim tables? On my V8 Ford the outer 4 holes run richer than the inner 4 holes. I have channel 1 wired to 1,4,5,8 and 2,3,7,6 to channel 2. Ive sorted a work around by setting the ecu to simi-sequential and only use 2 channels. The require fuel value ends up quite small but it's working. Just wondering what's needed to enable trims when only using 2 fuel channels.

Thanks Ryan
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS2extra 3.4.x_ish
ol boy
Super MS/Extra'er
 
Posts: 1198
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

Re: untimed batch fire vetrim tables

Postby Blown88GT » Tue Jul 18, 2017 4:53 pm

1988 Mustang GT, 57k miles, Orig. Owner
ProCharger 600B I/C, 12psi, FRPP Hdrs, Flwmstr F2, 3G Alt, Mk8 Fan & DCC, 3.55's, Prog Sprng, Subfrms, UCA, LCA, FCA, Tokico 5-way, CSA 16x8, Bridgestone RE760 225/50R16, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, LC2, C&L76mm blo-thru MAF, 30lb FRPP
User avatar
Blown88GT
Master MS/Extra'er
 
Posts: 634
Joined: Sun Dec 15, 2013 7:53 pm
Location: South Florida

Re: untimed batch fire vetrim tables

Postby ol boy » Tue Jul 25, 2017 10:07 pm

So just what i did then. Switching to simi-sequential really messes with the required fuel value to get it running right. Would be nice to have untimed with channel trims.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS2extra 3.4.x_ish
ol boy
Super MS/Extra'er
 
Posts: 1198
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az


Return to MS2/Extra Development

Who is online

Users browsing this forum: No registered users and 6 guests