untimed batch fire vetrim tables

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

Post Reply
ol boy
Super MS/Extra'er
Posts: 1532
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

untimed batch fire vetrim tables

Post by ol boy »

What's needed to enable the fuel injector ve trim tables? On my V8 Ford the outer 4 holes run richer than the inner 4 holes. I have channel 1 wired to 1,4,5,8 and 2,3,7,6 to channel 2. Ive sorted a work around by setting the ecu to simi-sequential and only use 2 channels. The require fuel value ends up quite small but it's working. Just wondering what's needed to enable trims when only using 2 fuel channels.

Thanks Ryan
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
Blown88GT
Super MS/Extra'er
Posts: 929
Joined: Sun Dec 15, 2013 7:53 pm
Location: South Florida

Re: untimed batch fire vetrim tables

Post by Blown88GT »

1988 Mustang GT, 59k miles, Orig Owner
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
ol boy
Super MS/Extra'er
Posts: 1532
Joined: Mon Sep 10, 2007 3:06 am
Location: Tucson, Az

Re: untimed batch fire vetrim tables

Post by ol boy »

So just what i did then. Switching to simi-sequential really messes with the required fuel value to get it running right. Would be nice to have untimed with channel trims.
306 SBFord, Torquer II EFI intake, 60 lbs injectors, 8 LS2 coils, VS Racing 7668 turbo, 4R70W, MS3x fw1.4 w/built in trans controller.
Post Reply