AC cut off for TPSWOT

This is a forum for discussing the development and testing of alpha MS2/Extra code. Documentation
(Runs on MS2 and Microsquirt)

Moderators: jsmcortina, muythaibxr

AC cut off for TPSWOT

Postby jsdevel » Sat Oct 21, 2017 12:49 pm

Could I modify my ms2extra-3.4.2 firmware as follows to disable my AC output when TPSWOT is cleared?

if (outpc.rpm < flash12.ac_idleup_min_rpm || outpc.tps > flash4.TPSWOT) {

I'm thinking I could make that change in ms2_extra_idle.c.
jsdevel
Experienced MS/Extra'er
 
Posts: 294
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ

Re: AC cut off for TPSWOT

Postby jsdevel » Sat Oct 21, 2017 8:48 pm

It worked! I was able to compile an updated version of the 3.4.2 firmware with this change and now my floodClear serves a dual purpose of closing fuel during cranking and shutting off my AC compressor :yeah!:
jsdevel
Experienced MS/Extra'er
 
Posts: 294
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ


Return to MS2/Extra Development

Who is online

Users browsing this forum: No registered users and 2 guests