Hi. .
I have a golf mk2 g60 8v and i dd like to install a megasquirt efi
I have a full Group injection system
I dd like to have a fully sequential injection or a sequential injection
Can you help me??? What i need for this? ?
golf g60 8v digifant 2
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 2
- Joined: Wed Jun 25, 2014 1:39 am
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: golf g60 8v digifant 2
The easiest way to do sequential injection is with an MS3 - were you looking for a ready to run setup or a solder it yourself kit?
Matt Cramer -1966 Dodge Dart slant six running on MS3X
-
- MS/Extra Newbie
- Posts: 2
- Joined: Wed Jun 25, 2014 1:39 am
Re: golf g60 8v digifant 2
I'dd like to buy a kit and solder it myself..i'm from italy..where i can buy The parts?
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: golf g60 8v digifant 2
If you look at the main Megasquirt site you can find a link to "how to purchase" and a list of suppliers.francescodenetto wrote:I'dd like to buy a kit and solder it myself..i'm from italy..where i can buy The parts?
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: golf g60 8v digifant 2
For that motor on sequential you need to add some sensors. Either a crank and cam trigger or a missing tooth cam trigger. In the US we usually switch to an aba block with has both the crank wheel and a distributor with single pulse can speed trigger.