How to get started with MS3 pro

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

How to get started with MS3 pro

Postby amk720 » Sun Feb 11, 2018 7:10 am

Hello everyone!,

I'm a sophomore mechanical engineering student. I was recently assigned to a project in which I had to start an engine. All I have is:
-The engine (Daihatsu KF-DET [660cc])
-An MS3pro
-A 12V battery

They say that they need me to get the engine started and wire up the MS3pro for tuning. I've barely scratched the surface. I have a lot to learn. I don't even know how to get the engine started. I was hoping that some people on this forum may be able to help me get started. Perhaps some books or manuals that can serve as step-by-step guides (both for starting the engine and connecting the MS3pro to it).

Any help would be immensely appreciated at this point. Thank you all in advance! :)
amk720
MS/Extra Newbie
 
Posts: 1
Joined: Sun Feb 11, 2018 12:16 am

Re: How to get started with MS3 pro

Postby jsmcortina » Sun Feb 11, 2018 9:26 am

The starting point is to download and read the MS3-Pro manual - there is lots of good information in there. You'll find that under the 'Manuals' link above.

James
I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 34060
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: How to get started with MS3 pro

Postby whittlebeast » Sun Feb 11, 2018 7:16 pm

I have a youtube channel designed to help people learn this stuff.

https://www.youtube.com/c/AndyWhittle_HowEFIworks
User avatar
whittlebeast
Super MS/Extra'er
 
Posts: 2154
Joined: Tue May 04, 2004 8:20 pm
Location: St Louis


Return to General, New users, Purchasing

Who is online

Users browsing this forum: No registered users and 1 guest