I had quick question , with my project in future i plan run dual bank injectors.... currently i want to just run 4 standered bosch (14.8 ohm) hi inpendence injectors in parralleon one of the fuel injection banks on the MS2.... is this "ok" practice sence there tied together will this drop the ohms down to around 3~4?? or is it safe?/
Sean...
Is it safe run 4 HIz injectors in series?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 115
- Joined: Mon Sep 12, 2005 3:50 pm
- Location: Modesto CA
- Contact:
Is it safe run 4 HIz injectors in series?
Last edited by BraneDeadx on Fri Oct 07, 2005 2:36 pm, edited 1 time in total.
Im hear to take over everyone and there megasquirt, ive been there done that with my own EFI gizzmo's check my site out for more!!
-
- Helpful MS/Extra'er
- Posts: 115
- Joined: Mon Sep 12, 2005 3:50 pm
- Location: Modesto CA
- Contact:
?
i goofed up i dont want to run them in series i ment to say parralle have them all wired up same , postive postive negitive negtive all for 4 them....
Im hear to take over everyone and there megasquirt, ive been there done that with my own EFI gizzmo's check my site out for more!!