i was planning on buying a set of #96 injectors but i heard they might be to big to idle at 850rpms.
what do you think?
my plans are big, somewhere around 450-500whp...
i have supporting mods and wanna get the injectors out of the way.
thanks
tyson
INJECTORS---how big is to big
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 163
- Joined: Tue Nov 22, 2005 7:55 pm
INJECTORS---how big is to big
IM SLOW
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
see http://www.ncs-stl.com/fuel/ReqInjectors02.xls
It does not address idle and low rpm Pulse Width. It concentrates on the high HP end of injector sizing.
AW
It does not address idle and low rpm Pulse Width. It concentrates on the high HP end of injector sizing.
AW
Thanks for the link, I do alreasy have that spreadsheet and it ties up with some I have put together over the past couple of years.
I am more after something that will calculate pulsewidths, I know this is not easy and there are a lot of variables to consider. I guess I'm looking for an online Megasquirt, where the outputs can be read on the screen!
I am more after something that will calculate pulsewidths, I know this is not easy and there are a lot of variables to consider. I guess I'm looking for an online Megasquirt, where the outputs can be read on the screen!
-
- Experienced MS/Extra'er
- Posts: 163
- Joined: Tue Nov 22, 2005 7:55 pm