Epoxy In Injector Pockets

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
WhiteRaider
MS/Extra Newbie
Posts: 5
Joined: Mon Jan 31, 2005 11:05 am

Epoxy In Injector Pockets

Post by WhiteRaider »

Does anyone know a good source to get four of these. I only need 4 so I don't really want to buy 8 of the MSD.

Also, I know that you can get four of the Holley pockets, but it doesn't mention that they are epoxy in. Has anyone used them in this way?

Cheers!
GotDart
MS/Extra Newbie
Posts: 31
Joined: Sun Oct 03, 2004 6:00 am
Location: Houston, TX

Post by GotDart »

I just bought a set of 8 on eBay for $40. There was another seller with sets of 8 for $45, but the listing also says sets of 4 are available for $25. The sellers ID is br340. His current auction number is 8028074479.
GotDart
MS/Extra Newbie
Posts: 31
Joined: Sun Oct 03, 2004 6:00 am
Location: Houston, TX

Post by GotDart »

I see rossmachineracing also has sets of 4 listed on eBay for $30.
WhiteRaider
MS/Extra Newbie
Posts: 5
Joined: Mon Jan 31, 2005 11:05 am

Post by WhiteRaider »

Thanks, I looked on ebay but didn't get the right search string. $25. is not a bad deal at all!

Cheers!
Post Reply