Injector info

rs2000 · Post by **rs2000** » Wed Mar 01, 2006 5:05 am

I'm having a lot of trouble finding the flow rates of injectors. If someone knows of a website that would be great..

I'm after flow rates of the following injectors;

Ford Sierra (2.0 Pinto engine)
Holden JE Camira (2.0)
TF Mitsubishi Magna (the 4 cyl one)

I'm ideally after a high impedance injector that flows about 230-250 cc/min that is popular so won't be too expensive 2nd hand. Any ideas?

Thanks

andrew

the bubbler · Post by **the bubbler** » Wed Mar 01, 2006 8:38 am

It's a guess, but how about injectors off of a BMW Mini Cooper S?

They use Siemens injectors I believe, so they'll be high impedence.

Plus they flow well for engines up to about 200bhp.

Cheap on ebay (people upgrading to Cooper s Works kit sell the old injectors).

Andy

rs2000 · Post by **rs2000** » Wed Mar 01, 2006 5:17 pm

That looks like a good lead, thanks.. Are the Siemens injectors the same physical shape as the bosch ones, ie will they directly replace mine? Do they have strange plugs that will requirt changing?

andrew

jakobsladderz · Post by **jakobsladderz** » Wed Mar 01, 2006 5:33 pm

TN-TP (early shape magna) magna injectors are around 265CC - they're bone coloured. I'd go for those.. They're easy to get hold of too, and they're bosch high-Z type..

JBA220 · Post by **JBA220** » Thu Mar 09, 2006 12:53 am

There is a list of injector ratings and original applications on this site, which could be of help, in downloads , EFI equipment
I am new to this type of computer use but lets try to give the link
http://www.msefi.com/dload.php?action=category&cat_id=6