hey has anybody set up a wasted spark on a blue top 4age 16v... would it be hard to set up and whats needed to set this up....
Thanks
Wasted Spark
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Try looking in the Success stories and see if you get any clues.
I am unfamiliar with that engine, but guessing it may have a 24/2 Nippondenso setup take a look at:
http://megasquirt.sourceforge.net/extra ... wheel.html
James
I am unfamiliar with that engine, but guessing it may have a 24/2 Nippondenso setup take a look at:
http://megasquirt.sourceforge.net/extra ... wheel.html
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 8230
- Joined: Thu Oct 14, 2004 12:48 pm
Re: Wasted Spark
Are you in the US or somewhere else?Kuma wrote:hey has anybody set up a wasted spark on a blue top 4age 16v... would it be hard to set up and whats needed to set this up....
Thanks
In the US, you're going to have to procure a CPS from the DIS 4agze or weld a crank wheel onto the crank to do wasted spark.
the US version of the distributor doesn't have what's needed in it to support wasted spark.