Hi - anybody got a ignition table for a BMW E30? Special for an 2,5 or 2,7 litres.
Its to get a good starting point on a 2,7 ETA with a 2,5 head on it.
Using MSnS-E code on a 2,2-board...
Ignition table for BMW
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 18
- Joined: Mon Feb 14, 2005 9:20 am
- Location: Danmark
- Contact:
yep, I'm definitely keen for that one too
BMW, 1985, E30, 325i, 2-door, 5spd. Lots of custom work. Turbo build in progress: http://www.e30tech.com/forum/showthread.php?t=55733
well I made some manual logging a while ago on my stock Motronic 1.3 ECU. Using a motortester to read out the ignition angle and a vacuumgauge in the manifold...
I havent tested it since i´m still struggling with my 60-2 wheel decoder setup
if any of you guys have any suggestions, please let me know!
http://www.msefi.com/viewtopic.php?t=18502
I havent tested it since i´m still struggling with my 60-2 wheel decoder setup
if any of you guys have any suggestions, please let me know!
http://www.msefi.com/viewtopic.php?t=18502
most helpfull...
thankyou...
WHY DA HELL 17 degrees at 4600rpm @ WOT ????
funny, thats where the torque is....
i was datalogging motronic 1.0 on my 325i with LC-1 wbo2 and map.... if anyone wants i can post ms datalogs here.
thankyou...
WHY DA HELL 17 degrees at 4600rpm @ WOT ????
funny, thats where the torque is....
i was datalogging motronic 1.0 on my 325i with LC-1 wbo2 and map.... if anyone wants i can post ms datalogs here.
BMW, 1985, E30, 325i, 2-door, 5spd. Lots of custom work. Turbo build in progress: http://www.e30tech.com/forum/showthread.php?t=55733