I am searching a throttlebody for a V8 project.
It needs to be at least 2x 60mm inside diameter.
Model should look like the Corvette and Camaro TPI body.
Both valves must be opened simultaneously.
And the outside as small as possible.
Which car has this ?
And can someone give the exact sizes of these TBs
If possible , have one spare for sale for our project.
Searching for Dual port throttlebody
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 2221
- Joined: Tue May 04, 2004 8:20 pm
- Location: St Louis
- Contact:
see
http://www.bbkperformance.com/products/ ... dies.shtml
Twin 62mm & Twin 65mm Throttle Bodies for 1996-2003 4.6 4-V Cobra & V-10 Truck/RV
Performance Throttle Bodies for GM Tuned-Port and LT-1 Models have a great throttle cable arrangment.
Alse see my site linked below
http://www.bbkperformance.com/products/ ... dies.shtml
Twin 62mm & Twin 65mm Throttle Bodies for 1996-2003 4.6 4-V Cobra & V-10 Truck/RV
Performance Throttle Bodies for GM Tuned-Port and LT-1 Models have a great throttle cable arrangment.
Alse see my site linked below