Please help me figure out wheel decoding (Toyota DLI)

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
87_7MGTE
MS/Extra Newbie
Posts: 27
Joined: Wed Aug 10, 2005 11:04 am
Contact:

Please help me figure out wheel decoding (Toyota DLI)

Post by 87_7MGTE »

Hi,

I dont know if anyone has this running yet, but how do you set up wheel decoding on MSII? More specifically, a Toyota DLI with a 24 tooth wheel with NE, G1, and G2 pickups? Is any internal or external modification required, or any components need to be added? And what has to be set in MegaTune?

Thank You
Car Info:Toyota Supra Turbo, I6, 24V, Turbocharged, Intercooled

MS Info (and other pertinent info): MSII v3.0, Code 2.35, MegaTune 2.25, EDIS-6, Zeitronix WB
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

The present MS2 code does not support the dual pickup 24/2 wheel.

It is planned to be added in the medium term.

Today you would need the MS1 chip and the Extra code to use that wheel.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
87_7MGTE
MS/Extra Newbie
Posts: 27
Joined: Wed Aug 10, 2005 11:04 am
Contact:

Post by 87_7MGTE »

and if i decided to go back to MSI/extra, how would i do that? (wheel decoding/installation)
Car Info:Toyota Supra Turbo, I6, 24V, Turbocharged, Intercooled

MS Info (and other pertinent info): MSII v3.0, Code 2.35, MegaTune 2.25, EDIS-6, Zeitronix WB
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

There's some info on
http://megasquirt.sourceforge.net/extra ... wheel.html

and come over to the MS1/Extra sub-forum.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Post Reply