Moderators: jsmcortina , muythaibxr
MarkW
Helpful MS/Extra'er
Posts: 93 Joined: Tue Mar 28, 2006 11:31 am
Location: Dorset, UK
Post
by MarkW » Wed Mar 29, 2006 12:23 pm
Hi All,
Newbie with probably a daft question thats been asked before!!
I'm fitting GSXR TBs to a zetec and running a megasquirt, hopefully to be up and running next week.
What I need to know is the impedence of the 600 injectors. Bit new to this but the guys whose helping with the ms was asking.
Cheers
MarkW
Helpful MS/Extra'er
Posts: 93 Joined: Tue Mar 28, 2006 11:31 am
Location: Dorset, UK
Post
by MarkW » Fri Mar 31, 2006 2:05 pm
Anyone??
MarkW
Helpful MS/Extra'er
Posts: 93 Joined: Tue Mar 28, 2006 11:31 am
Location: Dorset, UK
Post
by MarkW » Fri Mar 31, 2006 2:45 pm
Thanks for the help Lance
ElyasWolff
MS/Extra Newbie
Posts: 7 Joined: Fri Feb 24, 2006 6:15 pm
Location: Portland, OR
Post
by ElyasWolff » Wed Apr 05, 2006 10:12 pm
Did you ever find out if they were high or low impedance?
MarkW
Helpful MS/Extra'er
Posts: 93 Joined: Tue Mar 28, 2006 11:31 am
Location: Dorset, UK
Post
by MarkW » Thu Apr 06, 2006 3:01 am
Sticky thread above lists them as 13ohm and high impedence but there's a question mark after this, we are working on the basis that they are high impedence at the moment although I haven't tested them. Hopefully the tB's will be plumbed in today ready to fire it all up tonight. will let you know.