Injector output question

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
Pete M
MS/Extra Newbie
Posts: 22
Joined: Sun Feb 26, 2006 4:55 am
Location: UK

Post by Pete M »

Qveon

There are 2 wires for each injector channel simply to reduce the load on the pins of the DB 37 connector

So even if you connect each of the 4 wires to individual injectors you will still only have 2 channels

Pete
Post Reply