neon runs on 2 cyclinders

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
jw97neon
MS/Extra Newbie
Posts: 7
Joined: Tue May 31, 2005 12:03 am
Location: utah

neon runs on 2 cyclinders

Post by jw97neon »

k well i got my car to run using the vb291 mod the other day. it has been running great and then today i lost the 1 and 4 cyclinder. i hooked up the stock computer and the car runs great. any ideas please.
thanks john
emills24
MS/Extra Newbie
Posts: 3
Joined: Tue Apr 18, 2006 6:49 am
Location: Pompano FL
Contact:

Bump

Post by emills24 »

Same problem hear brand new unit car fries 1&4 IC (Q16) 2nd time?
Whats going on
jsmcortina
Site Admin
Posts: 39587
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Post by jsmcortina »

Is you coil wired up via the fuel pump relay to ensure it is OFF when the engine is not running?

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
emills24
MS/Extra Newbie
Posts: 3
Joined: Tue Apr 18, 2006 6:49 am
Location: Pompano FL
Contact:

Post by emills24 »

The problem We had was due to the Dwell settings being off or to high. The coil was charging too long. Reduce this and all will be well
Post Reply