well i got my neon running the other day using fuel and spark. it was running great no problems what so ever. and then today i started my car to let it warm up. while it was running it started to miss fire badly. so i stopped the car and checked my wires. all was good. so i hooked my stock computer back up to check and see if it was my coils, but the car started to run great. so i hooked to ms back up and it still only ran on two cyclinders. 1 and 4 are dead, 2 and 3 work. i checked for broken wires but they all are good. so i am thinking the vb291 mod went bad. is there a way to fix this problem?
thanks
john willhard
vb291 problems only running on two cyclinders
Moderators: jsmcortina, muythaibxr