i have a 2005 toyota 1nz-fe engine in my car. it's a small four cylinder. i have the electrical manual for it.
my manual shows four ignition coil/igniter units, each with four connections: IGT, IGF, +B, and ground.
it looks very similar to this, but this user, apparently, only has two:
http://www.msefi.com/viewtopic.php?t=18048
what confuses me is how to connect such a system to the MS and what kind of MS i would need.
i think that an MS1 would require the MSnS-E while MS2 would be fine on its own.
i'm pretty certain that MS2 is the way to go.
i've been looking at the MS seriously for a few months now, but i'm still confused about a few things like this.
thanks
what kind of ignition system do i have?
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 9
- Joined: Wed Feb 08, 2006 8:25 pm
- Location: Lancaster, PA
-
- Helpful MS/Extra'er
- Posts: 73
- Joined: Fri Feb 17, 2006 4:49 pm
- Contact: