Distributor + MS spark control

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
Zendalar
MS/Extra Newbie
Posts: 27
Joined: Thu May 12, 2005 1:17 pm

Distributor + MS spark control

Post by Zendalar »

Is it possible to tune the car with distributors vacuum line connected?

I just want to tune the car to work so that the idle is most stable. I want to leave the rest for the distributor's vacuum+centrifugal "system". So basically i want to use the MS to control ignition under 1000RPM.

Any advice on setting the table right?
Top
jsmcortina
Site Admin
Posts: 39619
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:
Contact jsmcortina

Post by jsmcortina »

This is not a good idea. Either have the distributor control the timing or have Megasquirt control the timing, not a bit of both.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Top
Post Reply

Return to “General, New users, Purchasing”