injector question

screamer69 · Post by **screamer69** » Thu Jun 22, 2006 10:05 am

right at the moment ive running 304 cc/m@3bar but in the next week or so im putting bigger injectors in it im going to be running 440cc/m @3bar or i might up the pressure to 4bar and then they will run at 513 cc/m

so heres the question ive got a good fuel map at the mo but as soon as i change the injectors is going to be out buy a lot so is there a way of changing it so i dont have to do the fuel map again

many thanx

ronsonol · Post by **ronsonol** » Thu Jun 22, 2006 12:40 pm

It is my understanding that all you should need to do is change the Reg_Fuel amount under injector settings, ie lower amount or use the wizard to generate the number for you. Should get you close.