Personal hy, I do not speak very well English, but necessary of the aid of yous, I am mounting a system of eletronica injection in a 750 XTZ necessary Supertenere and of some tips. My first problem is the collector (body) of the injection, I wanted to know which motorcycle or vehicle I could use to adapt? Which the sensors that would be necessarios for the project? The use of the MS in motorcycles is correct? Thank you,
Sidney
750 XTZ bike... What TB's?
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 229
- Joined: Wed May 25, 2005 7:35 pm
- Location: Austin, TX
- Contact:
Sideny,
I'll see if I can answer your questions.
For the throttle bodies, you need to measure your caburators. You need to know their diameter and the distance between them. Once you know that, take a look here http://www.msefi.com/viewtopic.php?t=6627 and see if anything looke like it might fit.
Sensors. You need an air temperature sensor to go in the intake. You need a coolant temperature sensor if you rbike is water cooled. If it's air cooled, then you need an oil temperature sensor or a cylinder head temperature sensor. And lastly, you will need an oxygen sensor.
MS Will work on a motorcycle.
I hope this helps you out.
Fred
I'll see if I can answer your questions.
For the throttle bodies, you need to measure your caburators. You need to know their diameter and the distance between them. Once you know that, take a look here http://www.msefi.com/viewtopic.php?t=6627 and see if anything looke like it might fit.
Sensors. You need an air temperature sensor to go in the intake. You need a coolant temperature sensor if you rbike is water cooled. If it's air cooled, then you need an oil temperature sensor or a cylinder head temperature sensor. And lastly, you will need an oxygen sensor.
MS Will work on a motorcycle.
I hope this helps you out.
Fred