MS-II Ignition setup for DIS ignition system

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

Post Reply
David. A
Helpful MS/Extra'er
Posts: 93
Joined: Thu Feb 24, 2005 6:16 am
Location: Israel
Contact:
Contact David. A

MS-II Ignition setup for DIS ignition system

Post by David. A »

Hi,

I'm using a MS-II PCB 3.0
My car [106 rallye 1.6 4cyl turbocharged] igntion system layout is:

60-2 missing tooth wheel
vr sensor
1 coil pack
And i guess the ignition module is embedde in the stock engine management system

What is the most "keep it simple" option i have to control spark in my car ?

This is the coil pack, 2 controls on single pacakge
http://img.alibaba.com/photo/50378545/Ignition_Coil.jpg

Thanks guys !

David
Top
David. A
Helpful MS/Extra'er
Posts: 93
Joined: Thu Feb 24, 2005 6:16 am
Location: Israel
Contact:
Contact David. A

Post by David. A »

Thanks Lance, sorry for the very late reply

The ignition module is SAGEM & the EM is Magneti Mareli 1AW 8P.16
The car is turbocharged peugeot 106 rallye 1.6L

AFAIK it can be done with the extra code and the missing tooth algorithm

David
Top
Post Reply

Return to “General, New users, Purchasing”