VR do not spike at 400RMP but work at lest 700
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 23
- Joined: Tue Mar 14, 2006 6:52 pm
- Contact:
VR do not spike at 400RMP but work at lest 700
When I manualy move my ignition slow do not work but when I move at least 700RPM works fine.
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Sorry I do not understand the question.
Could you explain the symptoms more and provide the critical details of engine, ignition setup, code version, board etc.
Without this details it is impossible for anyone to answer and your post will be ignored.
James
Could you explain the symptoms more and provide the critical details of engine, ignition setup, code version, board etc.
Without this details it is impossible for anyone to answer and your post will be ignored.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
if you are on v3 board then turn the 0 crossing pot all the way counter clockwise (thats the vr tuning pot close to the edge of the board).
failing that how far away is your sensor form the trigger wheel ? whould be about 1 to 1.5mm....
failing that how far away is your sensor form the trigger wheel ? whould be about 1 to 1.5mm....
BMW, 1985, E30, 325i, 2-door, 5spd. Lots of custom work. Turbo build in progress: http://www.e30tech.com/forum/showthread.php?t=55733
-
- MS/Extra Newbie
- Posts: 23
- Joined: Tue Mar 14, 2006 6:52 pm
- Contact:
Sorry;
Here is the complete info of my Car
I have a V3 board with MS1 MSnS.
Toyota TwinCam 16V
Problem description;
When the engine is cranking, the MS does not pulse. When I take the cam trigger out from the car and move it rapidly by hand, it works fine; but slowly it does not work.
Trouble shooting;
I checked the gage on the sensor and it has less than 2mm;
If anybody has any suggestions, please let me know, I do not want to push my car down the street to start the engine.
Here is the complete info of my Car
I have a V3 board with MS1 MSnS.
Toyota TwinCam 16V
Problem description;
When the engine is cranking, the MS does not pulse. When I take the cam trigger out from the car and move it rapidly by hand, it works fine; but slowly it does not work.
Trouble shooting;
I checked the gage on the sensor and it has less than 2mm;
If anybody has any suggestions, please let me know, I do not want to push my car down the street to start the engine.
f you are on v3 board then turn the 0 crossing pot all the way counter clockwise (thats the vr tuning pot close to the edge of the board).
BMW, 1985, E30, 325i, 2-door, 5spd. Lots of custom work. Turbo build in progress: http://www.e30tech.com/forum/showthread.php?t=55733
-
- MS/Extra Newbie
- Posts: 23
- Joined: Tue Mar 14, 2006 6:52 pm
- Contact:
-
- MS/Extra Newbie
- Posts: 23
- Joined: Tue Mar 14, 2006 6:52 pm
- Contact:
...been there done that....
BMW, 1985, E30, 325i, 2-door, 5spd. Lots of custom work. Turbo build in progress: http://www.e30tech.com/forum/showthread.php?t=55733