EDIS help with miss on one cylinder

A general forum and a place for initial or prospective users. See Manuals/Documentation
Click here to enter
Contact a Forum Administrator
If unsure where to post, post in this sub-forum.

Moderators: jsmcortina, muythaibxr

flosho
Experienced MS/Extra'er
Posts: 158
Joined: Sat Aug 27, 2005 10:21 pm
Location: Eau Claire, WI

Re: EDIS help with miss on one cylinder

Post by flosho »

Just swapped in a new/different set of injectors... 36# instead of #42 but I have the same problem.

Could the fuel rail or fpr be the cause of my issues? I just have a cheaper ebay adjustable fpr, and the gauge reads 43 psi while idling but im wondering if its not working properly?
81 931
-ms1 v3 w/edis

"It's not cobbled, its CUSTOM!"
mark8solo
MS/Extra Newbie
Posts: 9
Joined: Tue Aug 15, 2017 1:40 pm

Re: EDIS help with miss on one cylinder

Post by mark8solo »

Did you ever figure this out? I've got a 911 that has 3 cylinders down - all paired through the EDIS coils with functioning cylinders - driving me insane.
Post Reply