Page 1 of 1

88 ford turbo coupe help

Posted: Sun Jul 15, 2012 2:01 pm
by SBARTON
Hello, my name is Steve and I need some help getting started on my Megasquirt adventure. First off I have a 88 ford thunderbird turbo coupe and a megasquirt 2 kit, heres what I got so far;
megasquirt V2.2 board with a MBII V3.01 installed in it
4 channel ignition/injection board drivers V1.0
MSN_EXTRA daughter board V2.1
megasquirt stimulator V2
a 60 pin eec connector off of the board and ready to start soldering up

I have a LC-1 wide band coming and 02 weld in bung coming in the mail.
Laptop in hand ready to go, once the battery gets here and I need a usb to 232 serial adapter.

What do I need for my tfi ignition?

Would anybody happen to have a print for soldering this thing together?

Any help would be greatly appreaciated.

Re: 88 ford turbo coupe help

Posted: Mon Jul 16, 2012 8:52 am
by Matt Cramer
This guide may be what you're looking for:

http://www.diyautotune.com/tech_article ... dapter.htm