I've tried several times with no luck to get a post up for my MS project. Are there firewall or IP issues that I should watch out for? I'm new to the forum but very excited! (I hope this works!) My first project is a MS 2 on Mercedes M117 V8 conversion from MFI.
I'm currently struggling with how to get a Hall crank sensor to work with my MS2V3 board. Thanks!
MSQ listed below.
https://drive.google.com/file/d/0B2uTs2 ... sp=sharing
New user here, trouble getting going with forum so far
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 4
- Joined: Tue Jul 08, 2014 11:40 am
- Location: Minneapolis, MN
-
- Site Admin
- Posts: 39614
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: New user here, trouble getting going with forum so far
Take a look in the manuals - there's a link above.Spencermr2 wrote:I'm currently struggling with how to get a Hall crank sensor to work with my MS2V3 board. Thanks!
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".