Pressure sensors for fuel/air/oil
Moderators: jsmcortina, muythaibxr
Re: Pressure sensors for fuel/air/oil
I believe this is the correct pigtail for the GM 12616646 sensor
https://www.eficonnection.com/eficonnec ... ItemId=578
I case anyone is looking.
https://www.eficonnection.com/eficonnec ... ItemId=578
I case anyone is looking.
1995 Ford Lightning. Dart based 427 Windsor, Novi 2000, full sequential, E-85, etc. MS3X/v3.57
http://www.buildpics.org/
http://www.buildpics.org/
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
Any update on the gm sensor
Re: Pressure sensors for fuel/air/oil
Took off the eBay cheapie brass sensors today, and fitted the genuine GM 12616646 sensors.
The 150psi brass sensor checking oil was starting to leak around the outside. The other 150psi bass sensor of the fuel rail (E85) looked ok.
Im sure the GM sensor will work fine with oil, but fuel/ethanol is unknown... guess ill find out
The 150psi brass sensor checking oil was starting to leak around the outside. The other 150psi bass sensor of the fuel rail (E85) looked ok.
Im sure the GM sensor will work fine with oil, but fuel/ethanol is unknown... guess ill find out
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
Re: Pressure sensors for fuel/air/oil
Finally tracked down the sensors that I'd mentioned, after they vanished while moving.
I can test them if you're still interested, but it sounds like you found a solution.
I can test them if you're still interested, but it sounds like you found a solution.
Josh
-greasy fingered tinkerer
-greasy fingered tinkerer
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
any updates
Re: Pressure sensors for fuel/air/oil
The genuine GM 12616646 sensors are working great for fuel (e85) and coolant for me so far.
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: Pressure sensors for fuel/air/oil
Finally had my brass one start leaking.
Good find on the gm sensor, assuming its 1/8npt?
Still need a decent ~500psi for my clutch line sensor thats resistant to brake fluid.
Good find on the gm sensor, assuming its 1/8npt?
Still need a decent ~500psi for my clutch line sensor thats resistant to brake fluid.
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Pressure sensors for fuel/air/oil
That might work: http://www.digikey.com/product-search/e ... 23-1141-ND. It might be a bit big being a 1/4NPTPaul_VR6 wrote:Still need a decent ~500psi for my clutch line sensor thats resistant to brake fluid.
Jean
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Pressure sensors for fuel/air/oil
That's a fair price too.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Super MS/Extra'er
- Posts: 9130
- Joined: Sun May 02, 2004 6:51 am
- Location: Quebec, Canada
- Contact:
Re: Pressure sensors for fuel/air/oil
I thought so too.
Jean
Jean
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
how long you been using the sensor fuel(e85).MWPau wrote:The genuine GM 12616646 sensors are working great for fuel (e85) and coolant for me so far.
.
Re: Pressure sensors for fuel/air/oil
Hmm, about 3 months.
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
ok good. time to order 2 one for oil pressure and one for fuel.
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
does anyone have the part number for just the connector for the gm sensor,also the settings to use with this sensor.thanks
Re: Pressure sensors for fuel/air/oil
At the top of this page I posted alink for the fuel pigtail.
1995 Ford Lightning. Dart based 427 Windsor, Novi 2000, full sequential, E-85, etc. MS3X/v3.57
http://www.buildpics.org/
http://www.buildpics.org/
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
i know but i just want the connector.
Re: Pressure sensors for fuel/air/oil
it's in the digikey datasheet page 3/6elturbonitroso wrote:i know but i just want the connector.
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
can somebody confirm if this its the right calculations to use with this sensor.thanks
0v=-16.25
5v=146.25
0v=-16.25
5v=146.25
Re: Pressure sensors for fuel/air/oil
Close enough.
Im using -16.5, 145.3
Im using -16.5, 145.3
Toyota Celica GT4/Alltrac with 5S-GTE stroker (2.2L I4 turbo, high CR) on E85 w/FlexFuel.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
MS3 + MS3X + KnockBoard + RTC + BT + DIY CAN-IO-Board + DIY CAN Digital Dash.
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Pressure sensors for fuel/air/oil
ok.thanks